We spent many hours on research to finding 12v dc digital cooling/heating thermostat ferenheight, reading product features, product specifications for this guide. For those of you who wish to the best 12v dc digital cooling/heating thermostat ferenheight, you should not miss this article. 12v dc digital cooling/heating thermostat ferenheight coming in a variety of types but also different price range. The following is the top 10 12v dc digital cooling/heating thermostat ferenheight by our suggestions
831 reviews analysed
1. bayite AC 110V Fahrenheit Digital Temperature Controller 10A 1 Relay with Sensor
Feature
- KEEP TEMPERATURE IN DESIRED RANGE: It’s on/off control mode. Turn on your device at a degree and turn it off at another degree. The difference of the 2 degrees can be minimum 1 and maximum 25.
- HEATING OR REFRIGERATION WORKING MODE: Switch between heating mode and refrigeration mode according to the device your need.
- LONG SENSOR CABLE: 3m/9.8ft. Size of the WATERPROOF probe head: 4mm*20mm
- WIDE RANGE OF USES: seedling heat mat, home brewing, aquarium, pet breeding, incubation, BBQ, fermentation, accelerating germination, electric radiator, electric oven, etc.
- With compressor delay protection function for refrigerating control
Description
This is an AC 110V Fahrenheit Digital temperature controller. It can control the power to a freezer to prevent it from getting too cold, or control the power to a terrarium to prevent it from getting too hot, maintain a stable environment.
This controller provides heating and cooling modes and temperature alarm function.
For example:
If you choose heating mode, set control Value to 100°F, set span value to 10°F. The relay will be connected when temp drop to 90°F. The relay will be disconnected when temp reaches 100°F;
If you choose cooling mode, set control Value to 100°F, set span value to 8°F. The relay will be connected when temp reaches 108°F. The relay will be disconnected when temp drops to 100°F
Specification:
1.Power supply for the controller: AC 110V, 50/60Hz
2.Temperature unit: Fahrenheit, Measure range: -4 ~ 220°F
3.Temperature measure resolution: 1
4.Accuracy: ±0.5
5.Working mode: Heating OR Cooling mode
6.Slew range of temp controlling: 1 – 25(Max temp span between ON and OFF)
7.Control resolution: 1(Minimum temp span between ON and OFF)
8.Power consumption: less than 3W
9.Relay contact capacity: 10A/250VAC, 10A/110VAC
10.Data retention: Yes
11.Compressor delay protection: YES
12.Product size:8.5*7.5*3.5cm / 3.4*3*1.4in
13.Sensor Cable length: 3m/9.8ft
Package Content:
1x Digital Temperature controller
2. bayite DC 12V Fahrenheit Digital Temperature Controller 10A 1 Relay with Sensor
Feature
- Simplified Design—Easy to set. Support °F display
- One Relay Output—Switch between heating mode and refrigeration mode according to the device you plug into the controller. Maximum output load: 1100W(110V)
- Safe Protection—High and low temperature alarms are available when the temperature overshoots your desired temperature. Compressor delay protection time setting and Temperature calibration
- Warranty—1 year warranty for replacement or full refund without return. Comes with a 3m(9.8ft) waterproof probe sensor. Measure range is -4 ~ 212°F
3. Honeywell TH6320WF2003/U Lyric T6 Thermostat, 3 Heat / 2 Cool Heat Pump Or 2 Heat / 2 Cool Conventional, 2.25" x 6.125" x 5.125"
4. HiLetgo 2pcs W1209 12V DC Digital Temperature Controller Board Micro Digital Thermostat -50-110°C Electronic Temperature Temp Control Module Switch with 10A One-channel Relay and Waterproof
Feature
- 100% complete machine patch, wave soldering, stable performance, good consistency.
- Embedded CPU chip (MCU), more intelligent, lower power consumption.
- Automatic power set memory (MCU built-in EEPROM memory unit).
- Control accuracy of 0.1 degrees Celsius. Have been tested for stability, consistency and reliability.
- Tips: – long press set to get menu, starts at P0 – press +/- to get next P-parameter – press set to choose that parameter – press +/- to select the value you want for that parameter – press set to accept it – long press +/- = reset to default – power-out does reset to default – default temp set is 34.5C
Description
Specifications:
Model: W1209
Dimensions: 48.5 * 40mm
Temperature Control mode: ON / OFF
Temperature Range :-50 – 110 degree centigrade
Resolution: When temperature is 0.1 degree, the resolution is -9.9~99.9, other temperature segment is 1 degree.
Control Accuracy: 0.1 degree
Hysteresis Accuracy: 0.1 degree
Refresh Rate: 0.5s
High Temperature Protection 0 – 110 degree centigrade
Supply Voltage: DC 12V
Static Current: Less than 35MA, attract current less than 65MA
Output Voltage: DC 12V
Output Power: 20A relay
Measurement Input: NTC (10K 0.5%) Waterproof Sensor
Environmental Requirements: -10 – 60 degree centigrade; Humidity 20% – 85%
Instructions for use:
Connect the power supply and equipment, the measuring temperature is displayed,
press the “SET” button, press ” + or – ” to set the desired temperature (long press ” + or – ” to quickly increase or decrease),
press “SET” to confirm the setting and return, controller automatically performs the relay ON/OFF.
the thermostat output is 10A relay, meet a variety of high-power loads. LED Indicator: LED off indicates the relay off; Lighting, indicates the relay is closed.
Digital LED Tubes: “LL” indicates sensor open, “HH” indicates overrange, the relay will be forcibly disconnected; “—” indicates high temperature alarm
Long press the “SET” button to enter the main menu settings,
press ” + or – ” to switching between P0-P6,
then long press “SET” or 10 seconds without keystrokes to confirm the setting and return.
Package Included:
2*W1209 12V DC Digital Temperature Controller Board
5. Electronic Thermostat Controller, DROK Digital Temperature Control Board DC 6-30V -50 to +110 Degree Celsius High Accuracy LCD Digital Micro Temp Control Switch Module with Waterproof Sensor Probe
Feature
- DROK electronic thermostat controller power supply is DC 6-30V or 5V micro USB
- control load current is 10A (Max)
- test temperature is -50~110℃
- sensor length is 0.5 meter.
- High current: Our digital temperature control board adopts high density PC board installation technology, the switch capacity can be up to 10A in spite of the small size.
- LCD display: Designed with bright LCD display, people can check the temperature clearly from any angle.
- User-friendly functions: The thermostat module has the function of real-time temperature reporting, temperature correction function, high-temperature alarm, emergency stop function and support UART Set, which make the module reliable and easy to use.
- Applications: With waterproof temperature sensor probe, it can be widely used for domestic appliance, office machine, audio, equipment, automobile, etc. （Remote control TV receiver, monitor display, Audio,Raspberry Pi equipment high rushing current use application）
Description
Parameter:
Power supply: DC6.0~30V or 5V Micro USB
Temperature control range: -50℃~110℃
Temperature control precision: 0.1℃
Measuring input: NTC10K/B3950
Refresh rate: 0.5 second
Output type: relay output 10A
Probe type: waterproof probe, L: 0.5m
Set Parameter:
Working mode / setting temperature / hysteresis temperature setting:
1. In the running interface, short press the “SET” button to enter the quick setting interface.
2. After entering the quick setting interface, switch the parameter to be set (working mode/setting temperature/ hysteresis temperature) by short pressing the “SET” button.
3. Change the parameter value by pressing ‘UP’ or ‘DOWN’ after select parameter.
4. Hold press “SET” button for more than 3 seconds or have no any button operation for 6 seconds, it will save the parameters and exit the quick setting interface automatically.
Set ALA/OPH/OFE (Alarm temperature / delay starting setting / temperature correction:):
1. In the running interface, hold press the “SET” button for more than 3 seconds, enter the parameter setting interface.
2. After entering the parameter setting interface, switch the parameter to be set (alarm temperature/delay starting setting/temperature correction) by short pressing the “SET” button.
3. Use the “UP” “DOWN” button to change the parameter.
4. Hold press “SET” button for more than 3 seconds or have no any button operation for 6 seconds, it will save the parameters and exit the parameter setting interface automatically.
Package Including:
1x Electronic Thermostat Controller
6. 3 Pack Temperature Controller Module with Case, XH W1209 Display Digital Thermostat Module with Wate
Feature
- The W1209 thermostat module has a STM8S controller, a sensor input, keys, LED display, and a relay. It can be reprogrammed for control, timing, or counting.
- Temperature Measurement Range: -50~110℃. Control Precision: 0.1 celsius.
- Electronic digital thermostat with a 3-digit LED display, extremely bright. Operation both in heating and cooling to easily control equipment and devices.
- The output is electronically controlled by a microprocessor, to guarantee the utmost precision of intervention and an excellent resolution of reading temperature.
- The NTC probe is waterproof and allows to control the temperature even of fluids, allowing the controlled heated or cooling
Description
Specifications:
Model: W1209
Dimensions: 48.5 * 40mm
Temperature Control mode: ON / OFF
Temperature Range :-50 – 110 degree centigrade
Resolution: When temperature is 0.1 degree, the resolution is -9.9~99.9, other temperature segment is 1 degree.
Control Accuracy: 0.1 degree
Hysteresis Accuracy: 0.1 degree
Refresh Rate: 0.5s
High Temperature Protection 0 – 110 degree centigrade
Supply Voltage: DC 12V
Static Current: Less than 35MA, attract current less than 65MA
Output Voltage: DC 12V
Output Power: 20A relay
Measurement Input: NTC (10K 0.5%) Waterproof Sensor
Environmental Requirements: -10 – 60 degree centigrade; Humidity 20% – 85%
SInstructions for use:
Connect the power supply and equipment, the measuring temperature is displayed,
press the “SET” button, press ” + or – ” to set the desired temperature (long press ” + or – ” to quickly increase or decrease),
press “SET” to confirm the setting and return, controller automatically performs the relay ON/OFF.
the thermostat output is 10A relay, meet a variety of high-power loads. LED Indicator: LED off indicates the relay off; Lighting, indicates the relay is closed.
Digital LED Tubes: “LL” indicates sensor open, “HH” indicates overrange, the relay will be forcibly disconnected; “—” indicates high temperature alarm
Long press the “SET” button to enter the main menu settings,
press ” + or – ” to switching between P0-P6,
then long press “SET” or 10 seconds without keystrokes to confirm the setting and return.
SPackage Included:
3*W1209 12V DC Digital Temperature Controller Board
7. Line Voltage Mechanical Thermostat, Heating/Cooling, 120 to 277VAC
8. RioRand 12V DC Digital Cooling/Heating Thermostat Temp Control -50-110 °c Temperature Controller 10A Relay with Waterproof Sensor Probe
9. Honeywell TH1010D2000 Non-programmable 24VAC Thermostat T1 Pro non-Programmable thermostat for 24 Vac systems, single stage for heat only or cool only systems must set up heat or cool via the menu
Feature
- Application 24 Vac systems
- Gas, Oil, Electric Warm Air
- Hot water Coil
- Gas, Oil, Electric Hydronic
- or Steam / Gravity Systems
- Setting Temperature Range (F)- Heat: 32 F to 90 F
- Cool 50 F to 99F Setting Temperature Range (C) -Heat: 0 C to 32.0 C
- Cool: 10 C to 37.0 C
- Programmability- Non-programmable
- Supply Voltage – 20 to 30 Vac
- Switch Positions (System) – HEAT-OFF or COOL-OFF Switch Positions (Fan) – AUTO-ON
10. American Volt Single 12V Electric Engine Radiator Cooling Fan & Adjustable Temp Thermostat Controller Kit (13" Inch)
Feature
- American Volt high performance slim 12 volt electric engine cooling fans.
- Adjustable fan thermostat control switch kit fits ANY car, truck, van or RV.
- Powerful upgraded 80/90/120/130 watt fan motors have the best CFM.
- Flexible turn-on/turn-off temperature control range of 32-248’F (0-120’C).
- Probe is mounted in between radiator fins or inside water inlet tube.
Description
Specs below are for EACH fan:
6 Inch
Motor Size – 80 Watt
CFM Rating – 700
RPM Rating – 2250
Amp Draw – 8 Amps
Dimensions – 7.5″ x 6.75″ x 2.5″ center thickness & 1.5″ edge thickness
6 Inch (w/ Shroud)
Motor Size – 80 Watt
CFM Rating – 700
RPM Rating – 2250
Amp Draw – 8 Amps
Dimensions – 8″ x 6.5″ x 2.5″ center thickness & 1.25″ edge thickness
7 Inch
Motor Size – 80 Watt
CFM Rating – 800
RPM Rating – 2250
Amp Draw – 8 Amps
Dimensions – 8.5″ x 7.75″ x 2.5″ center thickness & 1.5″ edge thickness
9 Inch
Motor Size – 80 Watt
CFM Rating – 850
RPM Rating – 2250
Amp Draw – 8 Amps
Dimensions – 9.75″ x 9.75″ x 2.5″ center thickness & 1.5″ edge thickness
10 Inch
Motor Size – 80 Watt
CFM Rating – 900
RPM Rating – 2250
Amp Draw – 8 Amps
Dimensions – 11.5″ x 10.75″ x 2.5″ center thickness & 1.5″ edge thickness
12 Inch
Motor Size – 80 Watt
CFM Rating – 1400
RPM Rating – 2250
Amp Draw – 10 Amps
Dimensions – 12.5″ x 11.75″ x 2.5″ center thickness & 2.5″ edge thickness
14 Inch
Motor Size – 90 Watt
CFM Rating – 2500
RPM Rating – 2100
Amp Draw – 12 Amps
Dimensions – 15″ x 14″ x 2.5″ center thickness & 1.5″ edge thickness
16 Inch
Motor Size – 120 Watt
CFM Rating – 3000
RPM Rating – 2050
Amp Draw – 14 Amps
Dimensions – 16.5″ x 15.75″ x 3″ center thickness & 1.5″ edge thickness
Adjustable fan thermostat kit for any automotive vehicle. Probe measures liquid or contact temperature and sends power to the fan. Flexible turn-on/turn-off temperature control range of 32-248’F (0-120’C). Thermostat can be wired as a normally closed or normally open circuit.Turn-off temperature is always 15 degrees less than turn-on. Thermostat dial has both Celsius and Fahrenheit temperature markings. Probe is mounted in between radiator fins / inside water inlet.
Conclusion
By our suggestions above, we hope that you can found 12V Dc Digital Coolingheating Thermostat Ferenheight for you.Please don’t forget to share your experience by comment in this post. Thank you!
