Finding your suitable readers for 4in 12v cooling fan is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for 4in 12v cooling fan including detail information and customer reviews. Let’s find out which is your favorite one.
885 reviews analysed
1. TN TONNY Dual Head Car Fan, 5 Inches Electric Car Clip Fans 360° Rotatable, Car Fan 12V Cooling Air Fan with Stepless Speed Regulation for SUV, RV, Vehicles
Feature
- ❄12V Dual Head Car Fans – TN TONNY with 2 rotatable fan heads, 12V electric car fans blow hot air out of parking car efficiently. TN TONNY car fan can provide strong wind to cool down rear seat passengers and pets at back seat immediately when the car air conditioner is weak or no air conditioner at all.
- ❄Stepleess Speed Regulation & Strong Grip Clamp – Stepless speed regulation which has no specific wind speed setting limit maximizes your comfort. And clip-on fans easier clip on any surface and holds firmly than absorbent fans. That can be placed anywhere, whether you are using it on a car/truck/vehicle.
- ❄Adjustable Car Fan – TN TONNY car fan can be rotated by 360 degrees, and the fan base is also rotatable, which can bring coolness to the passengers or pets in every corner in the car. You just need to adjust by yourself. The two heads car fan also means it’s a “Couples Fan”, it can be used for two people in the car because each of the head fan’s direction can be controlled separately.
- ❄Fit to All 12 V Car/ Vehicle – Our these dual clip fan fit to all the family car van trunk SUV RV ATV boat in 12 V cigarette lighter.Low energy consumption, low noise but strong wind and the big clip to secure the fan to firmly fix in the car.
- ❄Wonderful Gift – TN TONNY electric car fan is an amazing gift for car owners. The car fan is energy saving and takes up very little space in car. You can order the durable car fans as a gift for your family and friends. They must be impressed by this wonderful gift.
2. GDSTIME 80mm x 80mm x 25mm 12V Brushless DC Cooling Fan
Feature
- Dimension of outer the frame is 80mm(L) x 80mm(W) x 25mm(H) / The size of fan in inch is 3.15in(L) x 3.15in(W) x 1in(H)
- The center to center distance beween the mountiong holes is 71.5mm/2.81in.
- Operating Voltage Range：5.5V to 13.8V. (overtake to 13.8V, it can also work. but not safe, and seriously affects lifespan of fan.)
- Rated Voltage: DC 12V
- Rated Current: 0.2 Amp
- Rated Speed: 2800 RPM
- Air flow: 43.6CFM
- Noise:31dBA
- Power: 2.1Watt
- Connector: XH2.54-2Pin
- Lead wire: UL Type (+): Red wire
- (-): Black wire. This is a two wire cooling fan
- Bearing Type: Sleeve Bearing
- Life: working up to 35000h at 25 degrees.
- Please Comfirm the Fan Size, Voltage, Connector and other parameters before purchase.
3. QIFUN 12V Adjustable Dual Head Clip Fan, 4 Inches Electric Car Clip Fans, 360° Rotatable Cooling Air Fan with Cigarette Lighter Plug for Vehicles, SUV, RV, Boat
Feature
- {Adjustble Dual Head Car Fans} – This 12V electric car fan with 2 rotatable fan heads, the 2 heads can be 360°rotate and be rotated to whatever direction by manually. It can provide strong wind to cool down rear seat passengers and pets at back seat immediately when the car air conditioner is weak or no air conditioner at all.
- {Sturdy Big Grip Clamp Car Fan} – This car clip fan is built with a big adjustable clamp, perfect for clip on car or vehicle’s Front and Back seats on car/ truck/ vehicle. The mouth of the clip can up to 2 inches(5cm), sturdy and useful.
- {2.5m Cord Cigarette Lighter Plug} – The cigarette lighter plug power cable is up to 2.5m which makes the fan extremely convenient, you can fix in the front or back seats. Cool for your baby, guests or pet dog at back seat or driving seat.
- {Multiple Application} – Fit to All 12V Car/ Vehicle dual car fan. Our these dual clip fan fit to all the family car van trunk SUV RV ATV boat in 12 V cigarette lighter. Low energy consumption, low noise but strong wind and the big clip to secure the fan to firmly fix in the car.
- {Easy Use with the Big Clamp} – Easier clip on any surface and holds firmly than absorbent fans. Just plug into 12V cigarette lighter power socket and be done easily by hand without any extra tools. That can be placed anywhere, whether you are using it on a car/truck/vehicle. Clamp design is more flexible.
Description
About This Product：
This is a stepless speed regulation clip car cooling fan that you can install on the visor, skylight, door handles, outlet, rearview mirror, back seat etc of the car or vehicle. 12V Dual Head clip-on fans that can be placed anywhere, whether you are using it on a car/truck/vehicle. Easier clip on any surface and holds firmly than absorbent fans.
What’s in the Package: ❄1 x 12V 4.5 inches Two Heads Vehicle Fan with Power Cord(8.2ft)
❄1 x Clip ❄1 x Swivel
❄1 x English Manual
Product Specifics: ❄Voltage: DC 12V
❄Power: 6.5W ❄Noise Level: <50db>
❄Fan Diameter: 4 inches ❄Cord Length: 2.5m(8.2ft)
❄Gross Weight: 0.6kg
Operating instructions: ❄Choose the right place to clip.
❄Keeping the switch off or turn to “0”. ❄Starting car, plug in the cigarette lighter.
❄To connect the fan and clip, adjusting appropriate angel of fan, tighten the swivel nut, turn on the switch. ❄After using it, turn off the switch, and pull out cigarette lighter.
Warm Tips: Dear customers, if you have any problem about this listing or this product no matter you place it or not, just feel free to contact the seller support. We are here to help you.
4. SEAFLO 4" In-Line Marine Bilge Air Blower 12V 270 CFM Quiet Boat White
Feature
- Voltage: 12V DC, Flow capacity: 270 CFM (Cubic Feet per minute)
- Current Draw: 6 Amp Draw, Suits 4″ Diameter Hose
- Provides ventilation for engine compartments, galleys, bilges and heads
- White ABS plastic construction with built-in molded mounting brackets
- Corrosion proof design and water resistant motor casing for use in the marine environment
Description
NEW 12V In-Line Air Blower Hi-Flow Capacity 270CFM, Suits 4″ Diameter Hose Included: 12v In-Line Blower Set of Installation and Operating Instructions Product Description This product is a 100% Brand New Beware of inferior non-genuine products on the market that claim to be just as good Provides ventilation for engine compartments, galleys, bilges and heads Hi-Flow 270 CFM capacity Up to 25% more efficient than conventional in-line blowers White ABS plastic construction with built-in molded mounting brackets Corrosion proof design and water resistant motor casing for use in the marine environment Hose connections each end, for use with 4″ diameter blower hoses Easy to mount – Can be mounted vertically or horizontally Installation and Operating Instructions Included! Does not include mounting screws For intermittent use only Specifications Voltage: 12V DC Flow capacity: 270 CFM (Cubic Feet per minute) Current Draw: 6 Amp Draw NOTE: These In-Line blowers are a genuine quality product – Don’t settle for inferior products on the market.
5. Coolerguys 120mm (120X120X38) High Airflow Waterproof IP67 12v Fan
Feature
- ENVIRONMENTAL RESISTANCE: IP67 design technology allows this to be completely dustproof and waterproof (rated to be submerged up to 1m for 30min).
- HIGHER AIRFLOW/LOWER NOISE: Updated blade and motor designs allow this to put out 157 cubic feet per minute with a noise level of 45db. That’s equivalent to the ambient noise of nighttime in the suburbs or a standard kitchen fridge.
- LONG LASTING: Dual ball bearings give a long projected lifespan of up to 67,000 hrs–that’s over 7 years. Backed by manufacturer with a 3 year warranty.
- STANDARD CONNECTOR: Standard 3 pin native connector allows for easy adaptability with many systems. Contact us if you need to determine which is the positive, negative, or tachometer (speed sensor) wires as they’re all painted black.
Description
Coolerguys 120mm (120x120x38) High Speed IP67 Fan
PRODUCT SPECIFICATIONS:
Fan Size: 120x120x38mm
RPM: 3500 +/- 10%
Rated Current: 0.75 Amp
Airflow: 157 CFM
Noise: 45 dB
Rated Voltage: 12 V DC
Bearing Type: Ball Bearing
Coolerguys is proud to launch our IP67 dust and waterproof fan series. These IP67 fans can be submerged up a meter underwater for up to 30 minutes. These are perfect for systems exposed to the elements such as solar enclosures, yachts, pest control, and exterior AV systems.
CERTIFICATIONS:
CE Listed
RoHS Compliant
6. Universal Slim Fan Push Pull Electric Radiator Cooling 12V 80W Mount Kit (Black, 7")
7. GDSTIME Dual Ball Bearings 120mm x 120mm x 25mm 5 inch 12v Brushless DC Cooling Exhaust Fan
Feature
- Dimension of outer the frame is 120mm(L) x 120mm(W) x 25mm(H) / The size of fan in inch is 4.72in(L) x 4.72in(W) x 1in(H)
- The center to center distance beween the mountiong holes is 105±0.3mm/4.13in.
- Operating Voltage Range：5.5V to 13.8V. (overtake to 13.8V, it can also work. but not safe, and seriously affects lifespan of fan.) The started Voltage is 3.6V.
- Rated Voltage: DC 12V
- Rated Current: 0.3Amp ±10%
- Rated Speed: 2500 RPM
- Air flow: 83.2CFM
- Noise: 35.7dBA
- Power: 3.5Watt
- Connector: XH2.54-2Pin
- Lead wire: UL Type (+): Red wire
- (-): Black wire. This is a two wire cooling fan
- Bearing Type: Dual Ball Bearings
- Life: working up to 50000h at 25 degrees.
- Please Comfirm the Fan Size, Voltage, Connector and other parameters before purchase.
8. Spal 30103018 4" Paddle Blade Puller Fan
Description
VA32-A101-62A * 4P/12V/SUM Specifications Type Low Profile – 12V Puller Height 4.29 (109mm) Width 4.29 (109mm) Depth 1.89 (48mm)
9. DC Brushless Cooling Fan, UCEC 4010 12V DC Axial Fan 40x40x10MM 2Pin for Computer Case, 3D Printer Extruder Humidifier and Other Small Appliances – 2 Pack
Feature
- Provide with Enough Airflow — Thanks to upgrade bearing system, UCEC Brushless Fan can reach 7000 RPM and provides an enormous amount of airflow, 7 pieces of blades get a better heat dissipation effect. Ball and sleeve bearing system allows the fan to be laid flat or stand upright.
- Safe & Quiet — CE, FCC, RoHS compliant and electrical protection, keep your 3D printer or computer running smoothly. Effectively solve the overheating problem of your computer or 3D printer. Anti-Vibration Design makes this Brushless fan can run so quietly that you can’t feel it.
- Well Built — Bearing System: Ball and Sleeve Bearing
- Speed:7000 RPM
- Air Flow:6.08 CFM
- Noise Level: 28 dBA
- Connector: 2pin-ph2.5
- Rated Voltage: 12V DC
- Power cable Length: 360mm.
- Advanced Design — UCEC Brushless Fan can provide with large air flow
- low noise
- long span life
- good running stability and corrosion resistance.
- Compatibility — Designed for projects that requires cooling or ventilation
- also can be used as a replacement fan for various products. Suitable for 3D printer, humidifier and other small appliances.
Description
UCEC DC Brushless Cooling Fan is design for computer Case, 3D Printer Humidifier and other small appliances.
Features:
Electrical Protection: Electronic circuit protection, impedance protection and temperature control protection.
Specification:
Frame Material: Plastic PBT UL94-V0
Blades Material: Plastic PBT UL94-V0
Rated Voltage: 12V DC
Bearing System: Ball and Sleeve Bearing
Storage Temperature:-30℃ — 70 ℃
Size: 40x40x10MM / 1.6×1.6×0.39inch
Blades Diameter: 38 mm
Connector: 2pin-ph2.5
Operation Voltage Range: 6.0-13.8V DC
Current: 0.09 Amp
Input Power 1.08 W
Speed:7000 R.P.M
Air Flow: 6.08 CFM
Noise Level: 28 dBA
DC Line Length: 360mm
Weight: 15g
Color: Black
Installation:
Step 1: Install the screws and nuts on the fan
Step 2: put the fan on the computer case and then use screw driver to screw it up carefully
Step 3: Connect the cable to the fan connector
Package Includes:
2 x UCEC 12V DC Brushless Cooling Fan
10. KEYNICE USB Desk Fan, 4 Inch Table Fans, Mini Clip on Fan, Portable Cooling Fan with 2 Speed, USB Powered Stroller Fan, 360° Rotate USB Fan, Personal Quiet Electric Fan for Home Office Camping- Black
Feature
- Clip and table desk type, perfect fan for the office, home, dorm, study, library, games room
- It is extremely compact, its size is about 8.1 x 7.8 x 4.2 inches, and the usb cable length is about 1.5 meters
- With quiet operation, you can keep this by your bedside and sleep comfortably without the noise bothering you
- 4 inch blade and 6 inch frame saves your desk space
- adjust the direction of the wind with 360° up and down, left and right adjustment, you can enjoy the cool wind from any directions
- Note: This fan just powered by USB, it needs plug in usb to use, connects to any PC/laptop via USB or can connect to a AC port with a USB AC adapter( not include)
Conclusion
By our suggestions above, we hope that you can found 4In 12V Cooling Fan for you.Please don’t forget to share your experience by comment in this post. Thank you!
