Top 10 Clip For Dishwasher

Comparable to OEM Parts include WP8269145, 8269145, EA393134, AP3039168, PS393134, 830941, AH393134 and many more.

FIXES THE FOLLOWING SYMPTOMS:
Door latch failure.
Door won’t close.

INSTRUCTIONS:
1. Turn off the power and water supply to avoid shock.
2. Open the dishwasher door and use a phillips screw driver to remove the screws that hold the dishwasher to the cabinet.
3. Close the dishwasher door and use it to pull the dishwasher out from the counter top. You only need to pull out far enough to expose the brackets.
4. The undercounter brackets are held in by the bent tabs on the bracket that hold the bracket in place. Straighten out the tabs and slide the bracket out.
5. Slide the dishwasher brackets into the same area you removed the original brackets and bend the tabs to secure the brackets to the dishwasher.
6. Finish by carefully sliding your dishwasher back under the cabinet. Use your provided screws to screw the dishwasher bracket directly to the underside of your counter with a Phillips screwdriver.

WHAT YOU GET:
2 x Dishwasher Mounting Brackets
2 x Mounting Screws

100% CUSTOMER SATISFACTION :
Feel free to contact us if you have any questions or problems with the item

1) Turn off power to your dishwasher in breaker box (ABSOLUTELY CRITICAL TO AVOID SHOCK) 2) Rotate lower access panel fasteners and remove them 3) Remove access panel/sound dampening pad. Determine if the water supply/power lines have enough slack to move the dishwasher. If not, you will need to turn off water supply valve, disconnect water supply line from inlet valve & release power line from junction box 4) Open dishwasher door, remove the screws from the existing brackets (if present) 5) You will next be moving the dishwasher. To do so, you may need to lower the dishwasher by adjusting the leveling legs 6) Carefully pull dishwasher a few inches away from the front of the cabinet 7) Use pliers to pull up tabs in back of the bracket (if present). Pull out old brackets 8) Insert new brackets. Use pliers to adjust the back tab to lock the brackets in place 9) Slide the dishwasher back into the cabinet (readjusting the leveling legs, if necessary). Replace the screws in your new brackets 10) Reverse steps 3, 2 and 1. ALL SET! This is a generic product manufactured and distributed by Impresa Products (TM). This is not a Whirlpool (TM), Sears (TM), Kenmore (TM), Amana (TM), Jenn-Air (TM), Crosley (TM), Maytag (TM), Roper (TM), Magic Chef (TM), Estate (TM) or Inglis (TM) OEM product and Impresa Products has no affiliation with or endorsement from these brands. Our product is not covered under any other manufacturer’s warranty (except for Impresa Products). The Whirlpool (TM), Sears (TM), Kenmore (TM), Amana (TM), Jenn-Air (TM), Crosley (TM), Maytag (TM), Roper (TM), Magic Chef (TM), Estate (TM) and Inglis (TM) brand names and logos are the registered trademarks of their owners. Any use of the Whirlpool (TM), Sears (TM), Kenmore (TM), Amana (TM), Jenn-Air (TM), Crosley (TM), Maytag (TM), Roper (TM), Magic Chef (TM), Estate (TM) and Inglis (TM) brand names, model or any other related designations are made solely for purposes of describing and illustrating compatibility.

A Revolutionary Solution for Quickly and Securely Installing Dishwashers Under Granite or Other Solid-Surface Countertops. Works on all Solid Surface Countertops! Simple, Fast, Secure – Not only is the Granite Grabber system simple and easy to install, it takes only minutes to position and adhere to the countertop. Once installed, the exclusive Granite Grabber adhesive sets within 5 minutes and forms a permanent bond within 1 hour. Vibration Resistant – The unique Granite Grabber system provides a strong, secure vibration resistant solution that does not compromise the integrity of the solid surface countertop. No more unsecured,tipping Dishwasher No unsightly wood glued underneath your finished countertops No drilling into that expensive countertop or beautiful cabinetry. NO GLUE NO DRILL NO MESS SIMPLE LASTING SECURE HOW IT WORKS Granite Grabbers worked to develop an adhesive tape, capable of adhering permanetly to the various rough and unfinished surfaces found on the bottom of Granite and other solid surface countertops. The one piece aluminum Granite Grabber system, includes a built in threaded nut to accept the supplied machine screw, so the hole will never strip out as many times as the Dishwasher may need to be removed and reset. The end result is a super low profile, one piece bracket, capable of being installed with NO DRILLING, NO GLUING, NO MESS.

PRODUCT DESCRIPTION: The W10508950 Dishwasher Stop Track keeps the upper rack from pulling out too far and falling from the track.Install it from the bottom of the rail, then push upward through both clip holes at the same time.

PACKAGE INCLUDE: 2 Pcs* W10508950 Dishwasher Stop Track

WORKS WITH MOST BRANDS: Amana Kenmore Whirlpool

WORKS WITH THE FOLLOWING MODELS NUMBER:
Kenmore: 66513222K600 66513222K601 66513223K600 66513223K601 66513229K600 66513229K601
Whirlpool: 7GU3600XTSY0 7GU3600XTSY1 7WDT950SAYM1 7WDT950SAYM2 7WDT950SAYM3
Amana: ADB1400PYB2 ADB1400PYB3 ADB1400PYB4 ADB1400PYD2 ADB1400PYD3 ADB1400PYD4 ADB1400PYS2 ADB1400PYS3 ADB1700ADB1 ADB1700ADB2 ADB1700ADS1 ADB1700ADS2
Ikea: IUD7555DS3 IUD8010DS3 IUD7500BS0 IUD7500BS1 IUD8010DS0 IUD8010DS1 IUD8010DS2 IUD8555DX0 IUD8555DX1 IUD8555DX2

PLEASE NOTE:Note that appliance parts can look similar in many ways.If you’re not sure whether or not a parts you’re ordering fits your model,please email us before you order.Include your model number and serial number.We can verify the part will fit your model.

A dishwasher top rack slide end cap stop clip limits the range of motion for the top rack of a dishwasher. When this part fails or begins to fail, the top rack may become misaligned or extend too far and cause the dishwasher door to fail to close or remain closed. Snap off and snap on design makes for a quick and easy repair! Always take appropriate safety precautions when performing repairs.

⚠️ Use a twisting motion for proper installation and do not pry or bend the part, otherwise breakage may occur.

OEM Factory Part. 611472

Whirlpool Aftermarket replacement for OEM Part # W10503548. Securely attach kick plate under dishwasher with this durable retainer clip. Fits many Whirlpool, KitchenAid, Kenmore dishwashers and more! IF YOU HAVE ANY QUESTIONS ABOUT WHETHER THIS WILL FIT YOUR EQUIPMENT, PLEASE CONTACT US THROUGH AMAZON OR ASK A QUESTION. Please note: This is an aftermarket part produced by Impresa Products meeting OEM quality (based on in-house testing)