The Best Cooktop Gas Line Hose And Fittings

Product Description

Dormont 0240892 Gas Appliance Connector Kit 48 In. Long 5/8 In. Outlet Diameter

From the Manufacturer

This Dormont gas connector is CSA Design Certified domestically and internationally for indoor and outdoor use with natural, manufactured, mixed, liquefied petroleum, and LP-gas air mixtures Durable, naturally corrosion-resistant 304 stainless steel construction offers an exclusive no-neck design to increase flexibility Quality flared end fittings create a metal to metal seal to ensure integrity in critical applications Manufactured domestically in the USA, all Dormont gas connectors are 100 percent leak tested to ensure consistent quality you can trust Safety Shield coating provides extra corrosion protection from accidental contact with common household chemicals

This is a Flextron gas connector from their Yc38 series of connectors, which is designed for indoor and outdoor use with gas dryers and water heaters. It has an outer diameter of 1/2″ and an inner diameter of 3/8″ and is made of stainless steel coated with a yellow epoxy coating along the entire length of the connector. The coating gives it extra protection against corrosion when it comes in contact with chemicals that are typically found in households. On the ends of this 46″ long connecter are nut fittings. The connector is rated for use in the temperature range of -40 f to 150 f and can be used up to a pressure of 0.5 psi. Please consult the product information for the flow capacity for this part, for natural gas. The part meets the amse A112.18.6 and ansi Z21.24, Z21.69 and Z21.75 gas appliances and manufactured homes standards. Each connector is 100% tested on leaks before it leaves the factory. The design has been tested on strength and it can withstand an internal hydrostatic pressure of 250 psi or 17 mpa without bursting or showing signs of leaks. It can also endure up to 30 bends without leaks in water at a depth of maximum 2 inches and withstands 15 twists of 90 degrees, without showing signs of corrosion. The connector can handle external temperatures of 800 f.

Along with everything needed for installing most gas appliances
On/off valve provides easy servicing of appliances or summer shutdown
5 Pieces kit includes: 22″ stainless flexible gas connector
1/2″female flare at both ends
1/2″ male Flare x 1/2″ NPT
1/2″ male flare x 3/8″ male NPT
1/2″ male flare x 3/8″ female NPT
Brass shut-off valve with 1/2″ female NPT x 1/2″ male flare
Fit for gas logs, garage heaters, gas stoves and wall mounted heaters

72″ Flexible Stainless Steel Gas Appliance Line With 1/2″ OD 1/2 MIP x 1/2 FIP. Stainless steel connector 1/2″ OD (3/8″ ID) 1/2 MIP x 1/2 FIP – Yellow Coated.

Product Description

BOLD GRAPHICS and VIBRANT COLOR-CODING MAKE CONSUMER S SELECTION QUICK and EASY KITS ARE IDEAL FOR NEW INSTALLATIONS OR APPLIANCE RELOCATIONS INCLUDES EASY-TO-FOLLOW TRILINGUAL INSTALLATIONINSTRUCTIONS and LEAK CHECK and SEALANT PACKETS KITS CONTAINS ALL PARTS NEEDED FOR AN EASY INSTALLATION CONTENTS: 5_8 O.D. 48 STAINLESS STEEL GAS CONNECTOR and 3 FITTINGS: TWO 1 2 M.I.P. TAPPED 3 8 F.I.P., ONE 3 4 M.I.P. TAPPED 1 2 F.I.P. ANSI Z21.24 CSA 6.10 ANSI Z21.75 CSA 6.27 PRESSURE RATING UP TO 1 2 PSI

This Dormont gas connector is CSA Design Certified domestically and internationally for indoor and outdoor use with natural, manufactured, mixed, liquefied petroleum, and LP-gas air mixtures Durable, naturally corrosion-resistant 304 stainless steel construction offers an exclusive no-neck design to increase flexibility Quality flared end fittings create a metal to metal seal to ensure integrity in critical applications Manufactured domestically in the USA, all Dormont gas connectors are 100 percent leak tested to ensure consistent quality you can trust.

From the Manufacturer

This Dormont gas connector is CSA Design Certified domestically and internationally for indoor and outdoor use with natural, manufactured, mixed, liquefied petroleum, and LP-gas air mixtures Durable, naturally corrosion-resistant 304 stainless steel construction offers an exclusive no-neck design to increase flexibility Quality flared end fittings create a metal to metal seal to ensure integrity in critical applications Manufactured domestically in the USA, all Dormont gas connectors are 100 percent leak tested to ensure consistent quality you can trust.

ONLY use for low pressure appliances
1.SHINESTAR Propane hose assembly 72 inches long with a 3/8 inch with female flare fittings on both ends.

2.Perfect for use with RV, gas grill, propane heater, stove, fire pit table, propane smoker, and more. Used to connect existing propane gas line to appliances equipped with the 3/8 inch male flare connection.

3.If your’re trying to extend the hose on your propane line, you can use this in combination with a 3/8 flare to 3/8 flare brass adapter

NOTE:

– Pay attention of the sharp edges when unpackaging and installing, better wear gloves

Product description

M CONNECTOR

From the Manufacturer

Everything you need to hook up your gas range Kit includes gas connector line, 3 fittings and sealant. In the State of Massachusetts, the following installation instructions apply: Installations and repairs must be performed by a qualified or licensed contractor, plumber, or gasfitter qualified or licensed by the State of Massachusetts. If using a ball valve, it shall be a T-handle type. A flexible gas connector, when used, must not exceed 3 feet.