The Best Cooling System Cleaner

THEROCURE by Evapo-Rust cures engine overheating by removing the rust from your cooling system. If your car, truck, or tractor is overheating, try Thermocure. Just 1 quart will service cooling systems up to 3 gallons. THERMOCURE Cooling System Rust Remover & Flush uses the technology in rust and corrosion removal to completely revitalize any water cooled engine. It removes rust scale and deposits from radiators, water pumps, water jackets, engine blocks, and heads. Thermocure will restore your engine’s ability to transfer heat to the coolant, which allows engines to run cooler and last longer. Thermocure is non-toxic, contains no acids, is biodegradable, safe on skin, and has no fumes. THERMOCURE Removes even heavy rust completely, is non-toxic, non-corrosive, is safe on skin and eyes. Contains NO acids, bases, solvents or other toxic ingredients, it will not harm un-rusted steel, safe on other metals, plastic, PVC and most paints.

Unless specified otherwise, do not use this product to flush cooling systems where the cylinder block is aluminum. Use Motorcraft Premium Cooling System Flush, VC-1.

From The Manufacturer
This misting nozzle are built-in stainless steel wafer through advanced forging process, strong durability, is 2.5 times the life of similar nozzle.
Nozzle can fully spray use the pressure of tap water. saving more than 10 times cost compared with the humidifier. TIPS:
★ soaking periodically in misting nozzle cleaner to remove mineral deposits that may accumulate with usage.
★ Leak-proof, self-sealing o-ring included with each nozzle; no tape or sealant is required.
★ A Filter on your mist system is highly recommended.

Included In The Package:
20 x Brass Misting Nozzles
1X 8-ounce misting nozzle cleaner

Primochill System Reboot was created to address the need to prepare/clean existing cooling loops AND be able to clean out old dyes that may have leached onto components during previous usage. Similar to Sysprep this flush style solution will cleanse out any debris/residue leaving your water cooling loop clean, clear, pristine and ready for any type of coolant. The beauty of ReBoot is it’s ability to pull color from stained components.

Specifications

Compatibility: ReBoot is compatible with rigid and flexible tubing of all sizes.  It is safe to use on rubber, plastics and acrylics

Included Parts: 1x 15ml Bottle of ReBoot (makes 1 gallon of coolant)

Instructions
1.Double-check connections to ensure loop is “closed”. No Leaks!
2.Empty bottle of ReBoot into 1 US Gallon of fresh DI or Distilled water, shake for 30 seconds
3.Fill loop with treated solution and be sure to remove as many air bubbles as possible.
4.Start pump and begin circulating the treated solution.
5.Run solution for at least 24 to 48 hours to ensure loop is properly flushed and treated. ReBoot is not an effective final coolant and should be replaced with coolant before any extended use of computer.
6.Drain System. Inspect drained solution for debris or foreign particles. Repeat flush if needed.
7.Fill system with fresh DI or distilled water and flush thoroughly to remove ReBoot solution checking for foam.
8.Drain system.**.
9.Fill loop with your choice of coolant and begin water-cooling.
** Reboot needs to be flushed from the system until no foam is seen and water runs clear

Warnings

This listing is for 1 Part Number 4070 NAPA G Coolant Filter Features Benefits 27 Micron – Taller Version Of # 4069 – Non-Chemical Filter – Has Epoxy Coated Can Filter compatible : Coolant SPin-On Height (Inches) : 5.214″ Gasket I.D. (Inches) : 2.462″ Gasket I.D. (mm) : 63 mm Gasket O.D. (Inches) : 2.834″ Gasket O.D.(mm) : 72 mm Gasket Thickness (Inches) : .2″ Gasket Thickness (mm) : 5 mm Height (mm) : 132.44 mm O.D. (Inches) : 3.694″ O.D. (mm) : 94 mm Thread Size (Inches) : 11/16-16 Warranty NAPA Filter s are Covered by a Comprehensive Limited Product Warranty. NAPA Filter s May Pay the Reasonable Cost for Parts Labor to Repair any System Damaged by NAPA Filter s Due to a Defect in Design or Material. Buyers Guide Make Model Engine Year(s) Brockway E359L 7.0 L 426 CID L6 Detroit Diesel 6-71 1973 – 1977 Brockway E360T 7.0 L 426 CID L6 Detroit Diesel 6-71 1973 – 1977 Brockway E361T 7.0 L 426 CID L6 Detroit Diesel 6-71 1973 – 1977 Brockway J358T 9.1 L 555 CID L6 Cummins V-555 Diesel 1973 – 1977 Brockway K359T 9.3 L 567 CID V8 Detroit Diesel 8V71 1973 – 1977 Brockway N257T 12.2 L 743 CID L6 Cummins NH-220 Diesel 1973 – 1977 Chevrolet Truck J8C042 Bruin 5.2 L 318 CID V6 Detroit Diesel 6V53 1981 – 1985 Chevrolet Truck J8C042 Bruin 5.2 L 318 CID V6 Detroit Diesel 6V53 1981 – 1985 Dodge Truck L700 7.0 L 426 CID V8 Detroit Diesel 1961 – 1971 Dodge Truck L700 7.0 L 426 CID V8 Detroit Diesel 1961 – 1971 Dodge Truck S700 9.1 L 555 CID V8 Cummins Diesel 1974 – 1980 Dodge Truck S700 9.1 L 555 CID V8 Cummins Diesel 1974 – 1980 Dodge Truck S700 9.3 L 568 CID V8 Detroit Diesel 1974 – 1980 Dodge Truck S700 9.3 L 568 CID V8 Detroit Diesel 1974 – 1980 Ford Tractor 6710 4.4 L 268 CID L4 Ford Diesel 1982 – 1985 Freightliner B2 7.2 L 439 CID L6 Mercedes MBE900 Diesel 2008 – 2009 Freightliner B2 7.2 L 439 CID L6 Mercedes MBE900 Diesel 2008 – 2009 Freightliner Classic 11.1 L 677 CID L6 Detroit Diesel Series 60 2001 – 2003 Freightliner Classic 11.1 L 677 CID L6 Detroit Diesel Series 60 2001

30 Micron – For Standard Service – Contains 4 Units Of Dry Chemical Additive (4.8 oz) Attributes Filter Style : Coolant Spin-On FilterGasket I.D. (Inches) : 2.47″Gasket O.D. (Inches) : 2.834″Gasket Thickness (Inches) : .2″Height (Inches) : 4.317″O.D. (Inches) : 3.694″Thread Size (Inches) : 11/16-16Gasket I.D. (mm) : 63 mmGasket O.D.(mm) : 72 mmGasket Thickness (mm) : 5 mmHeight (mm) : 110 mmO.D. (mm) : 94 mm

The PrimoChill Rad Clean – Radiator Cleaning Treatment is a solution for cleaning radiators outside of a loop. By using this cleaner you can “”scrub”” the inside of your rad without fear of damaging other components, seals or acrylic! This solution is easy to mix, easy to use, and gets you ready to go!
Specifications

Compatibility
Rad Clean is compatible with the internal metals found in radiators only! Using Rad Clean on nickel items is NOT compatible!
Instructions
For this pre-treatment to work correctly follow the instructions below. 
Step 1: Dilute one half bottle of RadClean into 32oz of distilled/Ro/Di water.
Step 2: Fill radiator up with Radclean mixture
Step 3:Close both ports with plastic fillports. Ensure they’re plastic. Shake radiator.
Step 4:Let your radiator sit for one hour.
Step 5:Drain radiator and flush radiator extensively with distilled/ro/di water
Step 6:Drain radiator and let dry completely.
Warnings
Important to use plastic fittings when cleaning radiators while using Rad Clean! PrimoChill is not responsible for any hardware damage. Use at your own risk.

NEW Napa Gold 4074 Coolant System Filter

Permatex Heavy Duty Radiator Cleaner removes rust and scale from automotive engines, radiators and water jackets. It also cleans and unclogs steam cleaner coils and boiler tubes. Not for use in aluminum radiators. Permatex does the job when it comes to specialty cleaners to dissolve rust, clean plastic or remove gum and deposits from parts. Permatex offers a complete line of professional strength cleaners and degreasers, each formulated to the highest standards and quality.