Finding your suitable readers for liquid cooling solution is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for liquid cooling solution including detail information and customer reviews. Let’s find out which is your favorite one.
933 reviews analysed
1. ARCTIC Liquid Freezer II 280 – Multi Compatible All-in-One CPU Water Cooler, Compatible with Intel & AMD sockets, Fan speed: 200–1700 RPM (Controlled by PWM)
Feature
- Newly developed PWM-controlled pump: the Liquid Freezer II features a completely new, PWM-controlled pump with a copper base, improved efficiency, a low power usage and quiet operation
- Improved power efficiency: unlike most pumps from our competitors, which run at full load even when idle, our pump clocks down consuming less power and producing less noise If no cooling is needed, even with its additional fan for VRM cooling
- Motherboard VRM cooling fan: an additional 40 mm fan next to pump helps cooling The motherboards VRM chips. This prevents overheating, especially when overclocking and allows continuous heavy loads
- Maintenance-free water loop: the water loop is Sealed, therefore no water or additives have to be refilled
- Integrated cable management: The pwm-cable of the fan is integrated into the sleeveless tubing. Thus fewer cables are exposed for a clean and sleek look within your case
Description
Fast and easy to install and extremely reliable, The liquid Freezer II mounting system is compatible with Intel and AMD sockets.
2. Enermax Liqmax III Addressable RGB 360 All-in-One CPU Liquid Cooler Dual Chamber Intel/AMD AM4 Support AIO ARGB LED Cooling 300W+ TDP; ELC-LMT360-ARGB
Feature
- Luminous addressable RGB fan and aurabelt water block display 16.8 million colors
- Dual Chamber water block design
- Patented Shunt-Channel-Technology (SCT) boosts thermal conductivity and eliminates any heat surges
- Dual-convex fan blade creates high volume air flow (72.1 CFM)
- Intel support: Intel LGA 2066/2011-3/2011/1366/1156/1155/1151/1150
- Amd support: AM4/AM3+/AM3/AM2+/AM2/FM2+/FM2/FM1
Description
Liqmax III A RGB, An addressable RGB AIO cooler for Intel and AMD CPU platforms, is designed to sync with ASUS Aura Sync, gigabyte RGB FUSION, MSI Mystic Light Sync, as rock polychrome, and RAZER Chroma to display 16.8 million colors and dynamic lighting effects. The dual chamber design water block has a central coolant inlet (CCI) Structure, combined with the shunt-channel technology (SCT) on the cold plate, It is able to inject the coolant at the hottest spot to prevent heat surges and shorten the coolant flow path, resulting in faster heat transfer. In addition, the dual-convex blade is able to generate Air pressure and high-volume Air flow to provide optimal cooling performance. Liqmax III A RGB cooler is an ideal choice for mainstream water-cooler addressable RGB Gaming rigs.
3. EKWB EK-CryoFuel Premix Coolant, 1000mL, Blood Red
Description
The EK-CryoFuel is a new revolutionary coolant for PC liquid cooling systems. EK-CryoFuel is the most chemically stable coolant that provides enthusiasts and gamers with the best possible level of performance and thermal efficiency with emphasis on color stability. EK-CryoFuel coolant is a pure, non-toxic coolant based on the patent pending chemical formula, which prevents the creation of any sediments in the liquid cooling loop. Liquid cooling users can rest assured that the EK-CryoFuel coolant, with its very low viscosity, will not clog or damage their water blocks and other parts of the loop when used with EK-DuraClear or EK-ZMT tubing.
4. ACM Economy Wash Bottle, LDPE, Squeeze Bottle Medical Label Tattoo (500ml / 16oz / 1 Bottle)
Feature
- Wash bottle used to wash labware and to store washing solutions, such as acetone or deionized water
- LDPE body for flexibility, elasticity, and impact, stress-cracking, and moisture resistance, and is lightweight
- Boston round shape for applications that require a rounded body, short neck, and narrow mouth to store liquid samples and solutions, and dry materials
- Polypropylene screw closure with its angled stem and draw tube molded in one piece for leak-proof applications
- Spout can be cut back to increase the flow of washing solution
Description
This wash bottle is used to wash labware and to store washing solutions, such as acetone or deionized water. The LDPE (low-density polyethylene) body is lightweight, flexible, and elastic, has an opaque hue, and resists impact, stress cracks, and moisture absorption. Its Boston round shape is used for applications that require a rounded body, short neck, and narrow mouth to store liquid samples, solvents, and chemicals, and dry materials. The screw closure has its stem and draw tube molded in one piece for leak-proof applications, and its angled dispensing nozzle directs the stream of liquid. The spout can be cut back to increase the flow of washing solution. This bottle is suitable for storing and transporting labware washing solutions. Lab bottles are used to store, hold, and mix liquids, powders, and other substances in a wide variety of scientific industries. Lab bottles have a more pronounced neck and shoulder than jars. Lab bottles are manufactured with a combination of characteristics in order to meet the demands of particular applications, such as for solution dispensing, mixing, and weighing, and use in centrifuge operations. They come in many shapes for specific applications, with a variety of mouth or nozzle shapes and sizes for specific use. Lab bottles are made from materials, such as glass (borosilicate or soda-lime) and an array of plastics, which are selected for chemical and thermal expansion resistance, transparency, and their adaptability in a variety of applications. Lab bottle interiors, caps, and lids are often lined with a protective material. Caps and lids help seal bottles to prevent solutions from spilling. The capacity refers to the fluid amount held by a lab bottle, and is commonly measured in milliliters (mL) and liters (l), and sometimes in ounces (oz). Lab bottles are suitable for use in chemistry and biology applications, as well as in pharmaceutical and scientific testing.
5. Thermaltake C1000 1000ml Pure Transparent Pre-mixed Clear Coolant Cooling CL-W114-OS00TR-A
Feature
- Coolant Protection: Anti-Corrosive, Anti-Freezing, Anti-Rusting and Water Scale preventive solution
- German Made: Made in Germany, the C1000 is a pre-mixed solution with a 3 Year Shelf Life providing ideal cooling performance
- Compliant Metals: Works with Copper, Brass, Nickel or Aluminum made components
- Cautions: Flush Cooling system with DI (Distilled Water) prior to installation. Use at own risk, keep out of reach of children
- Warranty: 2 Years
Description
The latest C1000 Pure Clear Coolant launched by Thermaltake is utilized either as a transparent coolant or to mix with TT Premium Concentrate Series to customize the coolant color users desire. This high performance new member is made in Germany, virtually odorless and non-flammable, plus it features anti-corrosion protection and heat-transfer medium for PC water-cooling and superb protection for copper, nickel, brass, and aluminum. Create your own coolant color and experience the excitement of color mix & match.
P/N: CL-W114-OS00TR-A
Capacity: 1000 ml
Color: Pure Clear
Hazardous component:
Ethanediol Value < 20%
CAS 170-21-1
EG 203-473-3
Index 603-027-00-1
Certificate Xn
R-Phrase 22
S-Phrase 2, 24/25,46
6. Corsair iCUE H115i RGB Pro XT, 280mm Radiator, Dual 140mm PWM Fans, Software Control, Liquid CPU Cooler
Feature
- Two 140mm Corsair ML series magnetic Levitation PWM fans deliver improved airflow for extreme CPU cooling performance
- 16 individually addressable RGB LEDs light up the pump head to produce stunning customizable lighting effects to match your build
- Experience incredible cooling performance with each Fan running from 400 to 2 400 RPM while in operation
- Zero RPM cooling profiles In Corsair iCUE software allow fans to stop entirely at low temperatures eliminating fan noise
- Corsair iCUE software allows you to control and synchronize your cooler’s RGB lighting with all iCUE compatible devices monitor CPU and coolant temperatures and adjust fan and pump speeds All from a single intuitive interface
Description
The CORSAIR iCUE H115i RGB PRO XT is an all-in-one liquid CPU cooler built for both low noise operation and extreme CPU cooling with a 280mm radiator and two CORSAIR ML120 PWM fans controllable between 400 RPM and 2 000 RPM Equipped with 16 individually addressable RGB LEDs on the pump head the H115i RGB PRO XT is customizable through CORSAIR iCUE software letting you create vivid lighting effects adjust fan speeds and enable Zero RPM mode to keep the noise down at low temperatures With a thermally optimized cold plate and low-noise pump design along with easy installation on most major CPU sockets the H115i RGB PRO XTpairs killer looks with chiller performance Tech Support # 1-888-222-4346 opt #1
7. Thermaltake Pacific DIY LCS PR22-D5 300ml 5-Speed Adjustable D5 Pump/Reservoir Combo 3-Port G 1/4" Thread Tt LCS Certified POM PMMA CL-W082-PL00BL-A
Description
Thermaltake Pacific DIY LCS PR22-D5 300ml 5-Speed Adjustable D5 Pump/Reservoir Combo 3-Port G 1/4″ Thread Tt LCS Certified POM PMMA CL-W082-PL00BL-A
Thermaltake launches the Pacific PR Series tube reservoir and D5 pump for the ultimate in custom PC water cooling configurations. Featuring exceptional performance and unrivalled reliability, the PR22-D5 is manufactured from high quality POM and PMMA material to provide a crystal clear, high performance, durable solution. By giving users ideal mounting, fitting and flow, the PR22-D5 is the right choice for PC enthusiasts. Make your system a showcase for all to see with the Thermaltake Pacific PR Series.
Key Features:
- Featuring 6mm thick of the pipe wall, which can sustain the maximum pressure up to 99 PSI (Pounds per square inch).
- Heat-Resistant Acrylic Tank: Made of reliable, light weighted POM and PMMA construction, which is crystal clear and highly durable. High quality acrylic (PMMA) tube maximum working temperature: 131°F
- G ¼” Thread Ports
Specification:
- 1mm (L) x 78mm (W) x 309.7mm (H)
- Material: POM + PMMA
- Capacity: 300ml
- Maximum Head: 15 Feet
- Maximum Flow Rate: 1135 L/Hr
- Maximum Pressure: 50 PSI
- Connector: 4 Pin
- Pump Speed: 1800, 2550, 3300, 4050, 4800 RPM
- G ¼”
Support
Please visit our website or search “Thermaltake Support” for any assistance.
8. Cooler Master MasterLiquid ML240L RGB V2, Close-Loop AIO CPU Liquid Cooler, 3rd Gen Dual Chamber Pump, 240 Radiator, Dual SickleFlow 120mm for AMD Ryzen/Intel 1151 (MLW-D24M-A18PC-R2)
Feature
- 3rd Gen 3rd Generation Dual Chamber Pump for overall cooling efficiency and performance
- New SickleFlow Refreshed exterior design for improved lighting and fan blades for a quiet airflow performance
- RGB Lighting Signature cooling performance with a RGB design for all of the users wanting lighting effects that are fully customizable
- Larger Surface Area Increased the surface area of the fins on the radiator for better heat dissipation
- Industrial Grade Seal High Industrial Grade EPDM material to strengthen the seal for improved longevity and Anti-Leaking
- Controller Included a wired RGB Controller
- CPU Socket Support: LGA2066, LGA2011-v3, LGA2011, LGA1200, LGA1151, LGA1150, LGA1156, LGA1155, AM4, AM3+, AM3, AM2+, AM2, FM2+, FM2, FM1
Description
CoolerMaster MasterLiquid ML240L RGB V2 is a refreshed design from the popular MasterLiquid Lite Series that elevates the exterior design elements The Pump of the ML240L RGB V2 has been enhanced with the newly designed 3rd Gen Dual Chamber Pump that improves the overall cooling efficiency of the AIO water cooler The radiator surface area has been enlarged to increase the surface area for heat dissipation for optimized cooling performance The ML240L RGB V2 will included the latest SickleFlow 120 RGB fan with a brand new design and Air Balance fan blades that is quieter than before without compromising on air flow and pressure.
9. Cougar Helor CPU Liquid Cooling with Addressable RGB, Core Box v2 and a Remote Controller (360)
Feature
- The Perfect Water Block: Durable and Convenient
- Dynamic RGB Lighting: The Addressable LEDs in the water block and the fans provide a memorable lighting spectacle that will raise your computer to the category of an art piece.
- Motherboard Synchronization + Core Box v2: Two ways to control this RGB powerhouse: with the included Core Box v2 and a remote controller, you have access to 100 preset RGB lighting effects. Through 3-pin 5v RGB motherboard synchronization, you can enjoy system-wide RGB effects!
- Performance First: Incredible Fans: Fan blades 16% longer than those of normal RGB fans and an ultra-broad speed range from 600 to 1800 R.P.M meet a powerful RGB backlight system to create the perfect cooling device.
- Sleeved and Extended Tubing: Helor Series’ sleeved and extended tubing is prepared to perform at the highest level for years while keeping evaporation under control.
Description
Cougar’s helot liquid cooling series is the perfect solution for gamers who require powerful CPU cooling with astounding visuals.
10. ID-COOLING FROSTFLOW 120 VGA Closed Loop AIO GPU Liquid Cooler, Compatible with Reference RTX2070/2080/2080Ti, 5700/5700XT Series, 1070/1080 Series
Description
Specifications:
GPU Compatibility:
Reference RTX2080Ti/2080/2070 GTX1080Ti/1080/1070Ti/1070 5700XT/5700
TDP: 220W
Radiator Dimension: 154×120×27mm
Radiator Material: Aluminum
Tube Length: 380mm
Waterblock Dimension: 72×72×32.5mm
Cold Plate Material: Copper
Pump Current: 0.25A
Pump Speed: 2100±10%RPM
Pump Bearing: Ceramic Bearing
Pump Life Expectancy: 50,000 Hrs
Pump Noise Level: 25dB(A)
Included Fans: 1pcs
Fan Dimension: 120×120×25mm
Fan Speed: 700~1500±10%RPM (PWM)
Max. Air Flow: 62CFM
Noise: 18~26.4dB(A)
Rated Voltage: 12VDC
Operating Voltage: 10.8~13.2VDC
Started Voltage: 7VDC
Rated Current: 0.2A
Power Input: 2.4W
Bearing Type: Hydraulic Bearing
Package Contents:
1 x Closed Loop AIO Liquid VGA Cooler
1 x Mounting Kit
1 x Thermal Grease Tube
1 x User Manual
FAQ: What is the GPU compatibility?
We have limited access to after market VGA cards, you may check official website on how to check the compatibility or contact product support.
ABOUT ID-COOLING
ID-COOLING is specialized in cooling products for desktop PCs and thermal solutions for industrial applications, covering CPU Cooler, VGA Cooler, Case Fan, Server Cooler, Mini Computer Cases, etc. With over 10 years’ experience in this industry, ID-COOLING enjoys a good reputation in innovation and superior quality and service.
Conclusion
By our suggestions above, we hope that you can found Liquid Cooling Solution for you.Please don’t forget to share your experience by comment in this post. Thank you!
