Top 10 Pc Water Cooling Temperature Sensor And Display

Barrow G1/4″ 10K Temperature Sensor Stop Fitting, Black

Model: TCWD-V1

1. Small size and easy to install. 2. Anodized, can accurately display the temperature of the water flow. 3. The display temperature can be accurate to 0.1 °C. 4. The water temperature is displayed instantly, and the data is refreshed in real time. 5. Suitable for general purpose G1/4 threaded interface. Specification:
Applicable accessory type: water cooled
Material: Aluminum
Process: Anode
Pattern: Smooth
Thread: G1/4
Size: approx. 6 * 4 * 3 cm/ 2.4 * 1.6 * 1.2 in
Weight: approx. 96.8 g
Package list:
1 * Temperature Meter

The Bykski A-RYZEN-TECH-V2-X CPU Water Cooling Block w/ Temp Digital Display features a real time temperature display. This display is integrated directly onto the top of the block creating an easy to read output as well as stunning visual aesthetics. The display shows real time temperature as well as a 120 second history of temp changes. The block is constructed of high purity copper that is electroplated to prevent oxidation. A high flow design is used to allow maximum performance. Built in RGB lights can be used to illuminate this beauty with style.
Features

Specifications

Compatibility

Parts Included

Warnings
Manufacturer reserves right to alter block design to expand compatibility. Delivered item may not 100% match pictured item.
PrimoChill is not responsible for any damage caused by or when using this product. Please use at your own risk.

The Bitspower G1/4 Thread Flow Sensor is a great way to install a safety valve into your looping loop. Just install this flow sensor into your cooling loop and connect the rpm cable on your motherboard CPU fan header. Once installed the flow sensor will send the RPM signal to the mainboard thus allowing you to utilize the BIOS safety settings. These can also be used on fan controllers and other RPM sensing devices as well! Model: BP-FS-CLBKDBR.

All-in-one computer water cooling flow meter flow indicator LED digital thermometer flow rate kit liquid cooling tools

Material: PMMA/Alloy/ABS
Measurement: 73mm*51.5mm*51.5mm
Connectors: G1/4″ threads
Voltage: 5v
Power connector: 3-pin

Please pay attention that wrong direction installed won’t display any data.

What’s inside the package?
1 x All-in-one computer water cooling flow meter flow indicator LED digital thermometer flow rate for water cooling system with RBW aura effect LED lights assembled
1 pack of mounting screws and bracket

Bitspower water flow monitor for water-cooling systems with Digital RGB LED

Model: BP-HFI-DRGB

【Product characteristics/ specifications】bitspower dual/ single D5 top design with reservoir Bitspower Z – multi/ Z – Tube/ Z series only support vertical retention bracket Included RoHS Compliant.

Features:

Suitable for PC water cooling system. 6 impeller water flow meter, helps you to observe the speed and working states of the water flow. Made of high-quality POM and acrylic material, durable to use. Easy to install and use.

Specifications:

Color: Black

Material: Acrylic + POM

Screw Thread: G1/4

Interface Diameter: 12.9mm

Size: Approx. 4 * 4 * 2.5cm

Weight: 38g

Package List:

1 * 6 Impeller Flow Meter (Connectors or plugs are NOT included.)

Specification:
Materials: Brass + PVC + ABS
Color: Shown as pictures
Applicable: All G1/4 thread water cooling equipment
Voltage: 5V-24V wide voltage
Temperature Range: -50 – 110 degrees
Power Connector: 4p D port
Quantity: 1 PC (other accessories demo in the picture is not included)
Size: Panel part length: approx. 47 * 28 mm/ 1.9 * 1.1 in
Probe Wire Length: approx. 100 cm/ 39.4 in
Power Cable Length: approx. 50 cm/ 19.7 in
Package Weight: 44 g

Package list:
1 * Temperature Meter

The flow sensors of the mps flow series are based on a pressure difference measurement and require no rotating parts. Thanks to the excellent sensitivity of the used sensor, only minimal flow resistance is induced. This principle of operation is unique in the PC water cooling sector and allows extremely compact sensors. Boasting intregrated signal analyzation with integrated USB- and aquabus interface, a configurable alarm output as well as an integrated water temperature sensor and external temperature input, this is the ultimate sensor for all applications! For monitoring and configuration the software aquasuite is available for download. A 4-pin aquabus interface allows direct connection to an aquaero 5 (not included). The alarm output can either be configured as an artificial rpm signal for connection to a fan channel with speed monitoring (e.g. Mainboard fan channels) or as a switching channel for e.g. activating a LED in case of an alarm. For alarm monitoring besides the measured flow rate and water temperature, an external temperature sensor input is available. The external temperature sensor input is compatible with all temperature sensors offered by Aqua Computer.

Model: 53131