564 reviews analysed
1. Dust Collection Power Tool Hose with Fittings For Use With Smaller Power Tools Shop Vacuums Dust Collectors and General Home Use
- Our small 1-3/16″ O.D. flexible dust collection power tool hose moves freely when connected with your power tools and vacuum. The hose with its specialized fittings, work with multiple power tools and jigs.
- The small end of the hose is ideal for connecting random orbital sander, palm sanders, biscuit joiners or any other power tool with small dust collection ports. This kit will also work with popular tools like the K4 or K5 Kreg Jig. Using this hose with your tools will keep your shop cleaner and can be quickly coiled up for easy storage.
- Included inside the box: 1 each ten foot long 1-3/16″ O.D. small flexible hose, 1 each small flexible rubber screw on fitting, 1 each large flexible rubber screw on fitting and 1 each plug in shop vacuum adapter that will allow you to connect the hose to most shop vac’s.
- The small screw on rubber fitting has a 1″ I.D. with a 1-3/16″ taper up to 1-1/4″ O.D. , the large screw on rubber fitting has a 1-1/2″ I.D. with a 1-25/32″ O.D. The vacuum adapter has a 2-1/4″ taper up to 2-5/16″ O.D. on the large end and the small end of the adapter is designed to plug into the end of the large flexible rubber screw on fitting. The I.D. and O.D. on the rubber end fittings and hose are approximate sizes and may vary slightly.
- PLEASE NOTE: Before you place your order, please check the inner and outer (I.D. and O.D.) diameter of your vacuum ports and power tool ports to make sure the hose and fittings will fit properly and work for your needs.
2. FEIN Turbo I Vacuum Cleaner, 5.8 Gallon, 1100W | Includes: 13 ft Suction Hose, Tool Coupling with Suction Power Control, Cellulose Filter, 1 Fleece Filter Bag
- Auto-Start Vacuum for power tools-allows your vacuum to turn on automatically!
- Powerful suction with 98.4″ of static water lift. Tool coupling with suction control for easy control of suction power
- On board storage for cord and accessories
- Long hose (13′) and cord (18′) for ease of use
- By-pass cooling for long life of vacuum
Fein Turbo 1 vacuum with 5.8 gallon tank which includes an Auto-start wet dry vacuum. Powerful 1100 watt by-pass motor is ideal for the job site or DIY use. An integrated power tool socket with automatic start/stop function ensures that the extractor starts after a power tool has been switched on. 66 DB noise level. Air flow rate 151 CFM ensures a high air flow to pull up everything! Bypass motor allows for the dirty air that comes from the hose never to come into contact with the motor. This eliminates dust spewing out from the motor when you turn the vacuum on and a very long life of the product. Simply said what goes in the vacuum stays in the vacuum. Filter guard for flat fold filter if the filter is dirty, the dirt can simply be tapped out of the filter cassette without the flat fold filter being damaged, The protective filter cassette means that there is no need to replace the cellulose filter for wet extraction. Long 13′ ft. hose and 18′ ft. cord for long reach allows you to be 54′ ft. from the outlet.
3. Hyde Tools 09165 Dust-Free Drywall Vacuum Hand Sander with 6-Foot Hose, 6′
Hyde Tools 09165 Dust-Free Drywall Vacuum Hand Sander with 6-Foot Hose
From the Manufacturer
Sanding indoors? A Hyde Vacuum Sander will keep your home dust-free, protecting your furniture, floors, electronics – and your lungs – from invasive drywall dust. Just attache it to any wet/dry vacuum, add a sandscreen (included) in place of sandpaper and you’re ready to start. The Hyde Vacuum Sander is very effective at keeping your home clean during drywall and other sanding projects. High-quality tool made in Canada. HEPA filter recommended but not included.
4. TDVS Universal Vacuum Hose Attachments Kit For Accessories Reducer Designed to Fit More Vacuums Than Any Other Adapters -5 Adapters Fits 1 1/16 to 1 3/4 inches Plus 2 1/2 to 1 1/4 Shop Vac Hose Connec
- Five Adapter attachments included. We had these designed to fit most standard vacuum hoses up to 1 3/4 inches and then we added a Generic Shop Vac Attachment and another common size adapter. We designed these to fit most vacuum hoses.
- The 4 adapters will fit into each other to make a variety of connectors. Just try one till it fits. The smallest size they will fit is 1 1/16 inches up to 1 3/4 inches. Generic Shop Vac adapter is 1 1/4 to 2 1/2 inches. Small adapter is 35mm to 32mm.
- Connect two together to make one adapter or connect all three together to make one adapter. One by itself might be all you need. Use these as a converter for your attachments to connect to your vacuum hose.
- These vacuum connectors are made out of flexible plastic and have either a tapered fit or a step fit. The generic shop vac and small adapter is hard plastic. The 3 larger ones have some give in the plastic.
- Use these to connect your power tools vacuum port to your hose in your work shop or with your shop vacuums. A common use for these adapters is connecting your vacuum hose to fit cleaning accessories and attachments.
Adapters For a Variety of Connections.
Five different adapters. (NOTE- 2 Adapters come already connected together but come apart easily)
Either use one adapter by itself or use any combination of the 4 by connecting them together to create an adapter that will fit your hose. ( the generic shop vac does not fit in to any of the 4 adapters, use by itself)
After realizing there are not really any universal adapters available we had these designed to fit the most common home vacuum cleaner hoses and then added a standard one which is the small adapter and the shop vac adapter to give plenty of options.
** Just a note if you combine more than one adapter to fit a heavier floor attachment you might need a piece of tape to hold it on, just because of the weight when you pick it up and down often.** You can also glue the pieces together.
Use these to connect your power tools vacuum port to your hose in your work shop or with your shop vacuums, also can be used with dust collection systems.
Please check the size of your vacuum hose, also feel free to message us on Amazon and we will be glad to assist.
5. Kozyvacu Mini Split/HVAC/AUTO AC Repair Complete Tool Kit with 1-Stage 4.5 CFM Vacuum Pump, Manifold Gauge Set, Hoses and its Acccessories …
- A Complete refrigerant changing tool kit for R410a, R134a, R134, R134A, R12, R22, R22A, R404A, R407C or R502. Especially designed for Mini-Split and HVAC system.
- [Gauge] Blue gauge (low): 2-1/2″ diameter, 0-500 PSI
- Red gauge (high): 2-1/2″ diameter, 0-800 PSI. Max working pressure: 800PSI, Burst pressure: 4000PSI.
- [Three Colored Hoses] Brass ‘Quick Seal’ fittings – 45 degree on one end, straight on the other – providing a leak-free seal. Sets of 60 inch long, 1/4 inch yellow, blue, and red hoses
- 800 PSI working pressure
- 4000 PSI burst pressure,
- [Vacuum Pump] High performance vacuum pump with high torque design for easy startup and efficient operation and a Die-Cast Aluminum Housing. Cast aluminum housings make the pumps lightweight, yet durable. Easy to start and maintenance free, the thermally protected motor is durable for long time duty. While a AC system requires 500micron ultimate vacuum, Kozyvacu TA450 delivers better than 150 micron to ensure the vacuum meets your requirements.
- [Complete Set] Full complete set for Mini-split/ HVAC and AUTO AC refrigerant recharging, includes 1) A pressure gauge set 2) Three colored hoses, with length of 4 ft, Red:1/4”-1/4” 3) Two ¼ to 5/15 converters 4) 1x Can tap, 5) ¼ Flare male to ½ ACME female convert. 6) 1 x TA450 Vacuum Pump, 7) One bottle of Vacuum Pump oil.
6. I clean Accessories Replacement Dyson Animal V6 DC35 DC44 DC59 DC58 DC61 Vacuum Cleaner Parts, Free Handheld Motorhead Vacuum Home Full Cleaning Tools Kit 4-Pieces
- Replacement Dyson Vacuum Cleaner Attachment Kits for Dyson Animal DC44,DC35,DC59,v6,DC24,DC16,DC62,DC39
- The dyson hose conventional state of about 19.5 in, the longest stretch to 70 in. its functions are connection and extension. You can use it to connect other dyson vacuum cleaner attachments.
- Keep your Dyson operating at peak performance! These vacuum cleaners are recommended that the replacement dyson crevice tools be washed every 2-3 months. And please remember After washing the filter, make sure it is fully dry before replacing it back into the vacuum.
- These High Quality Replacement Dyson Handheld Attachments not only which can replace all the attachment kit, but also can perfectly clean your house. it will be cleaned where you want, let your home become more comfortable and clean
- What’s in the box: For Dyson Vacuum Attachments(Combination Tools,Extension Hose ,Flat Seam Nozzle, Mattress tool )
7. Festool 500670 Coupling Sleeve D 36 DM-As/Ct
- Secure and slip-proof connection between the mobile dust extractor and the power tool
- Extremely compact dimensions ensure ideal handling with the power tool
- Rotating adapter prevents the hose from twisting
- Hose Connector for electric tool or suction nozzle
- The bayonet fitting produces a secure connection between the mobile dust extractor and the power tool
The integrated bayonet fitting connects the connecting sleeve on the suction hose securely and quickly to the extractor connector on the power tool, and it can be detached just as quickly. You decide when, not chance. It can be used for tasks from sawing to routing, whether in the workshop or on-site. This enables work to be carried out efficiently, cleanly, and systematically and reduces hazards to health. Dust-free.
8. JED Pool Tools 80-220 Inc 80-220 Hose Connector, 9-Inch
JED Pool Tools, Inc. comes to the rescue for all your pool supply and accessory needs! We have got it all! Check out our JED catalog, which includes pool maintenance equipment-skimmers, leaf rakes, thermometers, pool vacuums, leaf sweeps, chlorinators, pool maintenance kits, through the wall skimmers, backwash hose and filter accessories, pool safety equipment, pool signs, repair kits, floating candles, pool fountains and even water toys!.
9. POWERTEC 70136 4-Inch to 2-1/2-Inch Cone Reducer
- Connect 4” ID flexible dust collection hose to 2-1/2” ID flexible dust collection hose
- 4” nominal OD end measures 3-61/64” OD and 3-41/64” ID
- 2-1/2” nominal OD end measures 2-15/32” OD and 2-9/32” ID
- Adaptable to most shop vacuum cleaner hoses with 2-1/4” OD connectors
- Use Powertec 70149, Dust Control Flex Cuff (sold separately) to connect 4” nominal OD end to other 4” OD adapters
- Use Powertec 70148, Dust Control Flex Cuff (sold separately) to connect 2-1/2” nominal OD end to other 2-1/2” OD adapters
- Tough durable ABS plastic
The POWERTEC 4-Inch to 2-1/2-Inch Cone Reducer allows you to connect 4-Inch port to a 2-1/2-Inch hose or a 2-1/2-Inch port to a 4-Inch hose. The 2-1/2-Inch opening also allows you to fit Shop-Vac, Sears and a variety of other wet/dry vacuum cleaners. Simple to install, use and uninstall for the utmost in ease, performance and reliability.
By our suggestions above, we hope that you can found Vacuum With Tool Coupling for you.Please don’t forget to share your experience by comment in this post. Thank you!