If your bathroom exhaust fan is making strange noises or struggling to clear odors, it might be time for a replacement. The S99080166 Vent Bath Fan Motor and Blower Wheel Replacement Kit by ATMA SUPPLY is designed to restore functionality to your bathroom ventilation. This article delves into its features, installation process, and how it can enhance your indoor air quality.
Product Features
| Feature | Description |
|---|---|
| Voltage | 120V |
| Amperage | 1.4A |
| CFM | 70 CFM |
| RPM | 3000 RPM |
| Rotation Direction | CCW |
| Motor Type | C-Frame Motor |
| Shaft Size | 7/32″ x 1 1/4″ with splines |
| Wire Length | 6 1/2 inches with 2-prong plug |
| Fan Blade Diameter | 5.27 inches |
| Compatible Models | Broan 655, 657, 658, 679, 671, N655, and more |
Product Overview
| Pros | Cons |
|---|---|
| High airflow rate of 70 CFM | Can be a bit noisy |
| Compatible with various Broan models | Initial product issues reported |
| Easy installation process | Requires specific motor and fan blade checks |
Understanding the Importance of Bathroom Ventilation
When it comes to replacing the motor in your bathroom exhaust fan, the S99080166 Vent Bath Fan Motor Replacement Kit by ATMA SUPPLY offers an easy and efficient solution. Installing this kit can result in significant improvements in your bathroom’s ventilation, but it’s important to approach the process with care and preparation.
First and foremost, ensure your safety by disconnecting the power supply to the bathroom fan at the circuit breaker. This is crucial to prevent any electrical accidents during installation. Once the power is off, gather your tools, which typically include a screwdriver, a voltage tester, and possibly a pair of pliers.
Start by removing the fan cover, usually secured by a few screws or clips. Gently pull the fan assembly down from the ceiling to access the motor. It’s essential to take note of how everything is connected, so if needed, take a quick photo for reference. Disconnect the old motor’s wiring and unscrew it from its housing before replacing it with the new motor from the S99080166 kit.
As you connect the new motor, follow the wiring diagram provided in the kit. Ensure all connections are tight to avoid operational issues later. Once everything is reassembled, it’s time to test the fan. Restoration of power at the circuit breaker should be followed by turning on the switch to ensure your updated fan runs smoothly.
If you encounter resistance or complications, don’t hesitate to consult the manual or look for online tutorials specific to your fan model. Remember, taking your time and following these steps systematically will ensure a seamless installation. Enjoy the benefits of a well-ventilated bathroom, creating a healthier space for you and your family.
Installing the S99080166 Replacement Kit
Installing the S99080166 Vent Bath Fan Motor Replacement Kit can be a rewarding DIY project that enhances your bathroom’s functionality. First, ensure you cut power to the fan at the circuit breaker to avoid any electric shocks. Safety is paramount, so don’t skip this step.
Next, remove the fan cover by unscrewing it, exposing the motor. Take a moment to note the wiring connections. I often find it helpful to take a quick picture for reference later. Detach the old motor from its mounting bracket. Depending on the model, this could require some wiggling or gentle prying.
Once the old motor is out, it’s time for the installation of the S99080166 Kit. Start by securing the new motor into the mounting bracket. Then, make sure to connect the wiring according to the configuration you noted earlier. If you run into any issues, don’t hesitate to consult the product manual for wiring specifics.
Before reattaching the cover, test the fan briefly to ensure everything is working correctly. If the fan doesn’t operate, double-check your connections. Finally, replace the fan cover and restore power at the circuit breaker.
While installation is typically straightforward, some homeowners may encounter challenges like stubborn screws or misaligned brackets. A bit of patience and the right tools can go a long way in overcoming these minor obstacles. Overall, the usability of the S99080166 makes it accessible, even for those of us who may not be seasoned DIYers. Enjoy the fresh air and improved ventilation!
Conclusions
In conclusion, the ATMA SUPPLY S99080166 Vent Bath Fan Motor Replacement Kit stands out as a reliable solution for enhancing your bathroom ventilation. It effectively addresses common issues such as reduced airflow and unusual noises. If you’re looking for a quality replacement that promises satisfaction, this kit should definitely be on your radar.