Top 10 Water Cooling Biocide

Primochill System Reboot was created to address the need to prepare/clean existing cooling loops AND be able to clean out old dyes that may have leached onto components during previous usage. Similar to Sysprep this flush style solution will cleanse out any debris/residue leaving your water cooling loop clean, clear, pristine and ready for any type of coolant. The beauty of ReBoot is it’s ability to pull color from stained components.

Specifications

Compatibility: ReBoot is compatible with rigid and flexible tubing of all sizes.  It is safe to use on rubber, plastics and acrylics

Included Parts: 1x 15ml Bottle of ReBoot (makes 1 gallon of coolant)

Instructions
1.Double-check connections to ensure loop is “closed”. No Leaks!
2.Empty bottle of ReBoot into 1 US Gallon of fresh DI or Distilled water, shake for 30 seconds
3.Fill loop with treated solution and be sure to remove as many air bubbles as possible.
4.Start pump and begin circulating the treated solution.
5.Run solution for at least 24 to 48 hours to ensure loop is properly flushed and treated. ReBoot is not an effective final coolant and should be replaced with coolant before any extended use of computer.
6.Drain System. Inspect drained solution for debris or foreign particles. Repeat flush if needed.
7.Fill system with fresh DI or distilled water and flush thoroughly to remove ReBoot solution checking for foam.
8.Drain system.**.
9.Fill loop with your choice of coolant and begin water-cooling.
** Reboot needs to be flushed from the system until no foam is seen and water runs clear

Warnings

Primochill Sys Prep was created to address the immense customer requests for a clean and well maintained cooling system. Any successful venture into water-cooling starts with a true cooling loop preparation which can only be achieved by using Sys Prep.
Specifications

Compatibility: Sysprep is compatible with rigid and flexible tubing of all sizes.  It is safe to use on rubber, plastics and acrylics so rest assured all your seals, o-rings, reservoirs and such are all safe!
Instructions
1.Install your cooling loop and double-check connections to ensure loop is “closed”. No Leaks!
2.Empty bottle of SysPrep into 1 US Gallon of fresh DI or Distilled water, and shake for 30 seconds
3.Add mix to cooling loop.
4.Fill loop with treated water and be sure to remove as many air bubbles as possible.
5.Start loop pump and begin circulating the treated water.
6.Run treated water for at least 12 to 24 hours to ensure loop is properly flushed and treated.  While using for longer periods of time doesn’t have negative effects, Sysprep is not an effective final coolant and should be replaced with coolant before any extended use of computer.
7.Drain System. Inspect drained water for debris or foreign particles. Dispose of drained water. Repeat flush if needed.
8.Fill loop with your choice of coolant and begin water-cooling.**

** Residual treated water left in your loop is not harmful. If you prefer to remove it, do a simple rinse of the loop with fresh DI or Distilled Water. This rinse will not affect the results of the Sys Prep just performed.

Warnings:Do not mix with any pre-mixed coolants as it will over saturate the inhibitors.
PrimoChill is not responsible for any hardware damage. Use at your own risk.

Once placed in the water the silver will require 7-10 days to become effective.

XSPC Antimicrobial Silver Coils help to inhibit bacterial growth and algae when added to your watercooling loop. XSPC Silver Coil are made in the UK from 99.999% pure silver.

• Ribbon Dimensions: 75 x 3 x 0.5 mm
• Coiled Dimensions: 20 x 10mm
• Surface Area: 500mm square
• Weight: 1.3g
• Material: 0.999 Fine Silver

Model: 5060596650626

PrimoFlex Advanced LRT Tubing has been designed, formulated, and manufactured for today’s evolving standards in the PC water cooling industry. Advanced LRT has been carefully formulated to perform in a wide range of closed loop cooling systems, creating the most compatible water cooling tubing ever created.
SysPrep & Liquid Utopia INCLUDED
Included in the package at no additional cost is a 15mL bottle of SysPrep – Cooling Loop Pre-Treatment as well as a 15mL bottle of Liquid Utopia. Any successful venture into water-cooling starts with a true cooling loop preparation which can only be achieved by using Sys Prep. It will “flush” your loop and its components of any debris left by the manufacturing processes of your reservoir, block, pump, or radiator, leaving your water cooling loop clean, clear, pristine and ready for any type of coolant. Once your LRT tubing is crystal clear the Liquid Utopia offers a full line of protection against algae and corrosion.
Warnings/Cautions: With the use of different components, materials, fluids, and flow rates, results may vary with the appearance of your tubing. Advanced LRT is designed to work with a large variety of cooling components, however the use of alcohols, Ethylene Glycol and as well as any other harmful chemicals is strictly prohibited and will void your warranty.Tubing will stain if dyed coolants are used. PrimoChill is not responsible for any damage caused by or when using this product. Please use at your own risk.

PrimoFlex Advanced LRT Tubing has been designed, formulated, and manufactured for today’s evolving standards in the PC water cooling industry. Advanced LRT has been carefully formulated to perform in a wide range of closed loop cooling systems, creating the most compatible water cooling tubing ever created.
SysPrep & Liquid Utopia INCLUDED
Included in the package at no additional cost is a 15mL bottle of SysPrep – Cooling Loop Pre-Treatment as well as a 15mL bottle of Liquid Utopia. Any successful venture into water-cooling starts with a true cooling loop preparation which can only be achieved by using Sys Prep. It will “flush” your loop and its components of any debris left by the manufacturing processes of your reservoir, block, pump, or radiator, leaving your water cooling loop clean, clear, pristine and ready for any type of coolant. Once your LRT tubing is crystal clear the Liquid Utopia offers a full line of protection against algae and corrosion.
Warnings/Cautions: With the use of different components, materials, fluids, and flow rates, results may vary with the appearance of your tubing. Advanced LRT is designed to work with a large variety of cooling components, however the use of alcohols, Ethylene Glycol and as well as any other harmful chemicals is strictly prohibited and will void your warranty.Tubing will stain if dyed coolants are used. PrimoChill is not responsible for any damage caused by or when using this product. Please use at your own risk.

Create perfect cuts on up to 25mm tubing with the PrimoChill Universal Tube Cutter. It comes with a wide cutting base to support tubing while cutting. The result is an even cut that allows a perfect seal to the base of your fittings. The quality surpasses any other cutter on the market with a full metal body that allows a stable feel when gripped. The stability ensures the frame doesn’t twist making these a safe solution for all your cutting needs.

Specifications

Included Parts

Warnings:PrimoChill is not responsible for any hardware damage. Use at your own risk.