We spent many hours on research to finding water cooling tool kit, reading product features, product specifications for this guide. For those of you who wish to the best water cooling tool kit, you should not miss this article. water cooling tool kit coming in a variety of types but also different price range. The following is the top 10 water cooling tool kit by our suggestions
793 reviews analysed
1. Alphacool Alphacool Eiskoffer Professional Bending & Measuring Kit
Description
The Alphacool Eiskoffer is perhaps the most comprehensive collection of tools for bending 13mm or 16mm diameter HardTubes into nearly any form ever assembled. Inside the large, elegant, and sturdy case, each tool has its own separate place. All the tools are clearly arranged and neatly organised. The rubberised gloves ensure you always have a good grip on things, while also protecting you from splinters and dirt. The deburring tool is perfect for smoothing down HardTubes. Deburring is mandatory if you want the HardTubes to fit into their connectors properly. A long, sturdy saw and a mitre box serve to simplify cutting the HardTubes. The mitre box can be fastened to a table edge with special screw clamps, which are included. The inside of the mitre box is rubberised to prevent scratches and to keep the HardTubes from sliding around. The comprehensive set of measuring tools makes it easy to measure not just length, but also two or more angles at the same time. This tremendously simplifies the planning and execution of complicated bending sequences. In order to get the perfect bend each time, a substantial palette of bending radii and angles can be attached to the bending plate. The basis for this is formed by two different sizes of bending mandrels and arc mandrels. This allows you to bend HardTubes to any classic bending radius. The fitting stoppers can be used to simulate the depth of an Alphacool fitting on the end of the tube. This means an exact measurement and a perfect bend are always guaranteed when using Alphacool products. Alternatively, the straight mandrel with a stylus stopper can be used if you are using other products. The bending plate has a section that can accommodate self-designed or highly specialised bends. The case contains special flex mandrels that can be positioned in nearly any way. Model: 29131.
2. Bewinner 16mm Tube Bending Kit, 3pcs 16mm OD 45/90 /180 Degree Acrylic Hard Rigid Tube Bender Mould Tool Kit,Suitable for Water Cooling System
Feature
- Hard tube / Acrylic tube bending tool set. ABS multi-angle acrylic elbow molds for AWGM3 series, each group with a total of three.
- Suitable for 16mm rigid tubes. 16mm supporting tube outer diameter, 16MM acrylic tube hot bending assisted angular positioning.
- 45/90/180 curvature. The set consists of elbow molds with different angles of 45, 90 and 180 degrees.
- High strength ABS material. The positioning groove is accurate in angle and the mold is polished with high gloss to ensure the best contact between the finished product and the mold.
- Need enough heat to bend (such as a heat gun).
Description
Features:
Hard tube / Acrylic tube bending tool set. ABS multi-angle acrylic elbow molds for AWGM3 series, each group with a total of three. Suitable for 16mm rigid tubes. 16mm supporting tube outer diameter, 16MM acrylic tube hot bending assisted angular positioning. 45/90/180 curvature. The set consists of elbow molds with different angles of 45, 90 and 180 degrees. High strength ABS material. The positioning groove is accurate in angle and the mold is polished with high gloss to ensure the best contact between the finished product and the mold. Need enough heat to bend (such as a heat gun).
Specification:
Material: ABS
Color: Black
OD: 16mm / 0.63inch
Size: approx. 9.2 * 7.1 * 2.1cm / 3.62 * 2.8 * 0.83inch
Package list:
3 * Rigid Tube Bender Mould
3. XSPC Easy Cut & Bend Toolkit for XSPC PETG Tubing
Feature
- Heavy Duty Hose Cutter – The heavy duty cutter can cut through PETG tubing as effortlessly as you would cut flexible PVC tubing. Easily cut PETG rigid tubing without the need for a saw.
- PETG Easy Bending Tool – This tool allows you to easily bend PETG tubing at an angle between 0 and 180 degrees. Just heat the tubing with the bending rubber inserted, insert the tube into the tool and bend it to the required radius. This simple tool takes the guess work and difficulty out of bending rigid tube. (Suitable for 12-14mm outer diameter tubing)
- Bending Rubber – Solid rubber extrusion for bending PETG tubing. Insert into the tube before bending, to stop the PETG tube kinking, or deforming. (Bending rubber diameter is 10mm)
- PETG Chamfer Tool – Quickly chamfer the edges of PETG tubing by using this handy tool. Just insert the tubing and turn anticlockwise.
- PETG Edging Sandpaper – Ideal for sanding the edges of PETG tubing, after using a chamfer tool.
Description
XSPC PETG Tool Kit to bend and cut PETG tubing.Includes Heavy Duty Hose Cutter, PETG Easy Bending Tool, Bending Rubber, PETG Chamfer Tool, and PETG Edging Sandpaper.For use with XSPC branded PETG tubing.May not be compatible with other branded PETG products.
4. Bykski Tools Kit Set for Water Cooling Rigid PETG Tubing Cut System Mandrels Heat Gun Saw File (watercooler Tools Set)
Feature
- Near Perfect Bends: Essential for making precise bends when using 14mm OD PETG tube
- Mandrels: Includes Mandrels for 45/90/180/360 degree bends
- Pipe Cutter: Professional Grade Pip Cutter provides perfect beveled edge cuts
- Insert: Silicone Tube insert prevents kinks and help promote smooth bends while keeping inner wall diameter
- Recommended use of soapy water assists with tube insertion and tube heating
Description
Near Perfect Bends: Essential for making precise bends when using 14mm OD PETG tube
Mandrels: Includes Mandrels for 45/90/180/360 degree bends
Pipe Cutter: Professional Grade Pip Cutter provides perfect beveled edge cuts
Insert: Silicone Tube insert prevents kinks and help promote smooth bends while keeping inner wall diameter
Mounting: Pre-drilled holes allow easy mounting of mandrels to flat surface
Recommended use of soapy water assists with tube insertion and tube heating
1pc of Heat Gun / Hot Air Blower with One Nozzle
3pc of 45° 90° 180° PETG Bending Tool
1pc of Handheld Saw for Acrylic Tubing, NOT FOR PETG TUBING
1pcs of Smooth File
1pc of 39″ Length 12mm silicon insert
1pc of Needle-nose Plier
1pc of ABS Multi-angle Acrylic Tube Multi-function Elbow(use for 14MMDiameter PETG Tube/ 14mm Hard Tube Bending Spiral Tool)
1pc of Copper Roller Blade Cutting
5. PrimoChill Universal Tube Cutter (Flex and PETG)
Description
Create perfect cuts on up to 25mm tubing with the PrimoChill Universal Tube Cutter. It comes with a wide cutting base to support tubing while cutting. The result is an even cut that allows a perfect seal to the base of your fittings. The quality surpasses any other cutter on the market with a full metal body that allows a stable feel when gripped. The stability ensures the frame doesn’t twist making these a safe solution for all your cutting needs.
Specifications
Included Parts
Warnings:PrimoChill is not responsible for any hardware damage. Use at your own risk.
6. PrimoChill RFB Rigid Tubing Finishing Bit – 12mm ID x 16mm OD
Description
Are you constantly trying to deburr your rigid tube by hand? Stop hand cranking that cheap plastic reamer! The PrimoChill RFB (Rigid Finishing Bit) is a standard size drill bit with the power to save you time and energy while giving a perfectly finished tubing end. The RFB can be used at mid to low RPM to smooth out the end of your tube with no effort. Crank up the RPMs and you can customize the length of the tube as well. This functionality allows you to rough cut your rigid tube and then fine tune it to the perfect length with clean ends. Custom fitting your rigid tube is now so much easier!
Specifications:Tube Compatibility: 12mm x 16mm rigid tubing
Material Compatibility:PETG, PMMA (Due to extremely quick dulling of the bit, Copper tubing is not recommended.)
7. Barrow ABS 16MM Hard Tube Bending Kit, Black
Description
Barrow ABS 16MM Hard Tube Bending Kit, Black
Model: AWGM3-16
8. Thermaltake Pacific M240 D5 Res/Pump PETG Hard Tube Water Cooling Kit CL-W216-CU00SW-A
Feature
- W3 Water Block: 0.15mm internal fin construction, a copper base with anti-corrosive nickel plating and high-quality PMMA cover, and a universal mounting mechanism
- PR15-D5 Res/Pump Combo: Featuring exceptional performance and unrivalled reliability, the PR15-D5 is manufactured from high quality POM and PMMA material to provide a high performance solution
- R240 Radiator: Manufactured from high-quality German aluminum alloy and aerospace-grade materials, this radiator provides exceptional performance
- Ring 12 RGB Radiator Fan: 3 patented circular 256 multicolored 120mm RGB radiator fans with high-static pressure design, one smart fan controller included
- C-Pro Compression Fitting: With special four rubber O-rings leak-free design and patented structure for ultimate loop management. 8 compression fittings are included in the kit
Description
The Pacific M240 D5 Hard Tube Water Cooling Kit is an efficient, yet quality liquid cooling solution for all water-cooled gaming systems. Inside you will find a W3 CPU water block, PR15-D5 pump/reservoir combo, R240 radiator, C1000 Pure Clear coolant, 3 Ring 12 RGB fans, 8 C-Pro compression fittings, 2 adapter fittings, 4 PETG hard tubes and other accessories. 2 year warranty.
P/N: CL-W216-CU00SW-A
Dimension: 518(L) x 198 (W) x 223 (H)
Compatibility: Intel LGA 2066/2011/1366/1156/1155/1151/1150/775
AMD AM4/FM2/FM1/AM3+/AM3/AM2+/AM2(CPU Socket)
Components Dimension
Pump & Reservoir:228.1H) x 87.4(W) x 94.2(L) mm
Radiator : 39.9 (H) x 120.7 (W) x 273 (L)
Tube Dimension: OD : 16mm , ID : 12mm , L : 500mm
Fan Spec: 1500 RPM (1000RPM with LNC)
Coolant: Pure Clear Coolant
Kit Contents
CPU Water Block
– Pacific W3 CPU Water Block x1
Pump/Reservoir
– Pacific PR15-D5 Pump/Reservoir Combo x1
Radiator
– Pacific R240 Radiator 39.9 (H) x 120.7 (W) x 273 (L) mm x1
Fittings
– Pacific C-Pro G1/4 PETG 16mm OD Compression – Chrome x6
– Pacific G1/4 90 Degree Adapter – Chrome x2
Fan
– Riing 12 LED RGB 3 Pack x1
Coolant
– Thermaltake C1000 Pure Clear Coolant x1
Tube
– V-Tubler PETG Tube 16mm OD 500mm 4Pack x1
Accessory
– Silicone Insert 900mm Tt Premium Edition
– Intel and AMD Universal Backplated & Mounting Kit
– 24pin ATX Bridge Tool x1
– Thermaltake Thermal Grease x1
9. Corsair Hydro X Series, XD5 RGB Pump/Reservoir Combo, RGB Lighting
Feature
- A high-performance xylem D5 PWM pump controlled via PWM TO deliver the perfect flow balance for your loop.
- Ten top-mounted RGB LEDs light up your reservoir with stunning customizable RGB lighting when combined with a Corsair lighting Node PRO or Commander Pro.
- The integrated 330Ml Reservoir puts your custom cooling system’s coolant on display, with stunning angular design and an integrated fillport that makes filling, flushing and topping-off coolant easy.
- Included temperature sensor provides real-time coolant temperatures from inside your cooling loop.
- Rubberized mounting system reduces pump vibrations and noise, so your custom cooling loop is seen, Not Heard.
Description
The Corsair Hydro x series XD5 RGB pump/reservoir Combo is ready to drive the world’s most demanding custom cooling systems. A xylem D5 PWM pump provides powerful flow rate for multi-block loops and is adjustable via PWM to maximize cooling capacity or minimize noise. Ten built in RGB LEDs, controlled adding a Corsair lighting Node Pro or Commander Pro and powerful Corsair iCUE software, provide a vibrant splash of control to customize your lighting, while an included temperature sensor gives you real-time performance data from inside your system, for accurate cooling adjustment. Universally compatible with G1/4 fittings and with both 120mm and 140mm fan mounting brackets included, The XD5 RGB pump/reservoir is the heart of your custom cooling system. Tech Support # 1-888-222-4346 opt #1
10. UView 550000 Airlift Cooling System Leak Checker and Airlock Purge Tool Kit
Feature
- Airlift eliminates problematic airlocks in today’s automobile cooling systems
- Utilizing shop air, the technician can perform a leak test, eliminate airlocks and refill the entire system including the heater core in less than two minutes
- OEM approved
- Minimum shop air requirement:90 psi/60 bar
- Eliminate time consuming bleeding and purging
- Airlift eliminates problematic airlocks in today’s automobile cooling systems
- Utilizing shop air, the technician can perform a leak test, eliminate airlocks and refill the entire system including the heater core in less than two minutes
- OEM approved. Works on: Cars, Trucks & Off Road Vehicles
Conclusion
By our suggestions above, we hope that you can found Water Cooling Tool Kit for you.Please don’t forget to share your experience by comment in this post. Thank you!
